跳至主要内容

Pipe cross

A pipe cross is a kind of pipe fitting that be used in the place where four pipes meet together. The pipe cross may have one inlet and three outlets, or there inlets and one outlet. The diameter of the outlet and inlet can be the same and can also be different. That is to say, straight cross and reducing cross are both availabe.

Features of Pipe cross:

  • There are three female openings in a T shaped pipe cross.
  • There are straight pipe crosss which have the same size openings.
  • Reducing pipe crosss have one opening of different size and two openings of the same size.
  • There are sanitary pipe crosss which are used in waste lines. These kind of pipe crosss have a curved branch which is designed for a clean out plug. They are used to prevent obstruction of waste.
  • A cross pipe cross has four equal sized female openings.
  • A wing pipe cross has lugs to fasten the fitting to a wall or stud.
  • A compression pipe cross uses compression fittings on two or more ends.
  • A test pipe cross has a threaded opening. This opening is used in conjunction with a threaded plug for a clean-out opening on a drain pipe.

Buying Tips of pipe cross:

What should buyers consider for bulk purchase of pipe cross?

  • Type of pipe cross—whether welded or seamless
  • Standard
  • Size and dimension
  • Wall thickness
  • Material of construction
  • Durability and Economical
  • High pressure and temperature resistance
  • Corrosion resistance etc.

Pipe cross, LT, Lateral cross , RT, Reducing cross, cross fittings accord to ANSI, ISO, JIS and DIN Standards, Measures 1/2 to 56 Inches.

  • Size range: 1/2 to 20 inches
  • Types: Straight cross, Reducing cross, Y-type
  • Pressure: SCH5 to SCH160
  • Standard: ANSI B16.9/B16.28, MSS SP-43/SP-75

The fitting not only played a role in conection the cossing pipeline but also can control the volume by designed with different dimension of cross ends,sometimes we also adopt rib to reinforce the mechanical property when face hard woeking conditions.

Pattern
Weld
Seamless

Nominal size

1/2”-48” (DN15-DN1200)

1/2”-20” (DN15-DN500)

Wall thickness

2-100mm

2-50mm

Bend radius

SCH5S-SCH160 ,XXS

SCH5-SCH160

Type

cross/reducing cross

cross/reducing cross

Applications of pipe cross:

Pipe crosss are widely used in various commercial and industrial applications. Industrial applications include:
  • Chemical processing
  • Petroleum
  • Pulp/paper
  • Refining
  • Textile
  • Waste treatment, Marine
  • Utilities/power generation
  • Industrial equipment
  • Automotive
  • Gas compression and distribution industries
  • Pipe crosss are also recommended for industrial plant fluid power systems.

Materials

  • Carbon scrossl: ASTM/ASME A234 WPB-WPC
  • Alloy scrossl: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911
  • Stainless scrossl: ASTM/ASME A403 WP 304-304L-304H-304LN-304N
  • ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti
  • ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H
  • Low temperature scrossl: ASTM/ASME A402 WPL 3-WPL 6
  • High performance scrossl: ASTM/ASME A860 WPHY 42-46-52-60-65-70

Bending, squeezing, pressing, forging, machining and more

ASME B16.9 Buttweld Cross Available Types

ANSI/ASME B16.9 Butt weld Equal Cross
  • Buttweld Equal Cross
  • Reducing Cross Fittings
  • ASME B16.9 Unequal Cross
  • Buttweld Straight Cross
  • ANSI B16.9 Buttweld Cross
  • Buttweld Cross Pipe Fittings
  • Equal Cross Fitting
  • Buttweld Reducing Cross
  • Butt Weld Reducing Cross Fitting
  • Steel Reducing Cross Pipe Fittings
  • High quality Unequal Cross
  • Butt Weld Reducing Cross Pipe Fittings
  • ASME B16.28 Buttweld Pipe Cross
  • Buttweld Barred Cross
  • Cross Fitting
  • Buttweld Equal Cross Fitting

ANSI/ASME B16.9 Butt weld Equal Cross

Schedule: Sch 5 TO Sch XXS.

Sizes: 1/2” TO 36” (SEAMLESS UPTO 24”) & (WELDED 8” TO 36” )

Type: Butt Weld (BW)

Thickness: Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and costumised.

Standards: ANSI – B 16.9

  • ASTM A403 – ASME SA403 – ‘Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings’
  • ASME B16.9 – ‘ Wrought Buttwelding Fittings”
  • ASME B16.25 – ‘Buttwelding Ends’
  • ASME B16.28 – ‘Wrought Steel Buttwelding Short Radius Elbows and Returns’
  • API 590-605
  • MSS SP-43 – ‘Fabricated & Wrought Butt-Welding Fittings for Corrosion Resistant, Low Pressure Applications’

此博客中的热门博文

ANSI/ASME B16.25 standard specification

ANSI/ASME B16.25 is the standard covers the preparation of butt welding ends of piping components to be joined into a piping system by welding. The standard includes the butt welding ends information of General scope, Welding Bevel designs, Preparation of inside diameter of welding ends and the tolerances involved. ANSI/ASME B16.25, Buttwelding Ends Following are the dimensions of the butt welding pipe ends according to ANSI B16.25. It includes requirements forwelding bevels, for external and internal shaping of heavy-wall components, and for preparation of internal ends (including dimensions and tolerances). Coverage includes preparation for joints with the following: (a) no backing rings (b) split or noncontinuous backing rings (c) solid or continuous backing rings (d) consumable insert rings (e) gas tungsten arc welding (GTAW) of the root pass Details of preparation for any backing ring must be specified when ordering the component. ANSI/ASME B16.
阅读全文

Large diameter elbow

Large diameter elbow is curved connecting pieces that join straight lengths of pipe, commonly at a 90° or 45° angle, allowing obstructions to be avoided in plumbing, ventilation, welding, and automotive applications. ASME B16.9 Standard covers overall dimensions, tolerances,ratings, testing, and markings for factory-made wrought buttwelding fittings in sizes NPS 1⁄2 through NPS 48 (DN 15 through DN 1200). Size range: 20 "-62" Inch Wall thickness: Sch5-Sch160 XXS Material: Carbon steel: ASTM A234 WPB, WPC, ASTM A420 WPL1, WPL3, WPL6, WPHY42, 46, 52, 56, 60, 65, 70 Alloy steel: ASTM A234 WP1, WP12, WP11, WP22, WP5, WP7, WP8, WP91 API5L X42 X52 X56 X60 X65 X70 X80 Stainless steel: ASME A403 WP304, 304L, 316, 316L, 310 Standards: ANSI, DIN, JIS, GB, ASTM, JB, SH, YB, SY, HG, API ASME Usage: Petroleum, chemical, power, gas, metallurgy. Our pipe elbows are widely used in many industries, such as power generation, petroleum, natural ga
阅读全文

Pipe fittings

Pipe fittings are work that involves the installation or repair of pipes or tubes. Pipes and tubes are necessary for a wide range of reasons. We are passionate about elbows, tees, reducer … Pipe elbows  >> Steel elbow is used to be installed between two lengths of pipe or tube allowing a change of direction,usually these carbon steel elbows distinguished by connection ends. +  Long radius  +  Short radius Pipe bending  >> Pipe bend can be made of variety materials,like carbon steel,alloy steel,stainless steel,low temperature steel or high performance steel,etc. + 180 degree bending     +  ASTM API 5L Gr.B bends   Pipe Tees  >> We can provide seamless tube tees and welding tube tees,which can also be divided into straight tees and reducing tees.Usually,the pipe tees have the same inlet and oulet sizes. +  Reducing tee     +  Barred Tee     +  Stainless Steel Tee Cross  >> A pipe fitting, having four op
阅读全文