Pipe fittings are work that involves the installation or repair of pipes or tubes. Pipes and tubes are necessary for a wide range of reasons.
We are passionate about elbows, tees, reducer …
 | Pipe elbows >>Steel elbow is used to be installed between two lengths of pipe or tube allowing a change of direction,usually these carbon steel elbows distinguished by connection ends.+ Long radius + Short radius |
 | Pipe bending >>Pipe bend can be made of variety materials,like carbon steel,alloy steel,stainless steel,low temperature steel or high performance steel,etc.+ 180 degree bending + ASTM API 5L Gr.B bends |
 | Pipe Tees >>We can provide seamless tube tees and welding tube tees,which can also be divided into straight tees and reducing tees.Usually,the pipe tees have the same inlet and oulet sizes.+ Reducing tee + Barred Tee + Stainless Steel Tee |
 | Cross >>A pipe fitting, having four openings in the same place, at right angles to each other. |
 | End caps >>End Cap, Carbon Steel cap, Stainless Steel Caps, ANSI, ISO, JIS and DIN Standards, Measures 1/2 to 56 Inches.+ Large size end caps + Carbon steel end caps |
 | Pipe reducer >>Pipe reducer are tube fittings that are widely used in a number of industries in order to providing greatest connection flexibility in connecting fractional tubes in various installations.+ Concentric reducer + Eccentric reducer |
 | Stub end >>Stub Ends are fittings used in place of welded flanges where rotating back up flanges are desired. They are also called Lap Joints and Vanstone Flared Laps. A rotating back up flange seats itself against the back surface of the Stub End.+ Stainless stub end + Carbon steel Stub end |
 | Coupling Fittings >>Coupling fittings are used for fluid conduits in which each end portion of two tubes to be connected is provided with a swaged-on adapter carrying the necessary means to connect or disconnect the tubes without disturbing the swaged-on adapter. |
We have a team of experienced professionals with years of experience in manufacturing.
What exactly do you mean by pipe fittings?
Different from the tranditional process technique, we don't acid pickling at the last 2 steps, but directly bright annealing at the optimum temperature. Advantage: Guarantee the accurate thickness, smooth and balanced bright of both inside & outside surfacePipe Fittings End Beveling
In the behavior, we make beveling after shot blasting, bevel ends are fully machined by advanced equipment Double Beveling Machine ensure the height, length, thickness, O.D. and I.D. are all qualified.Welding Bevel acc. to
- ASME B16.9, Factory-Made Wrought Steel Buttwelding Fittings
- ASME B16.28, Buttwelding Short Radius Elbows and Returns
- ANSI/ASME B16.25, Buttwelding Ends
- MSS SP-97, Socket Welding, Threaded, and Buttwelding Ends
Delivery requirment:
- Marking: SunnySteel, material grade, standard, specification, heat no.
- Surface Treatment: Bright annealed, polished outside and inside surface.
- Package: Each pipe in a PVC bag and caps on both ends then bundled in wood case, (option: Bundle with knitted plastic bag/stee crate. )
- Mill test certificate: according to EN 10204 3.2
Inspection:
- Third party inspection, or by clints
Fittings prologue >>
Pipe fittings are made from pipes, plates and forging material, which are used to change of direction & connected pipe size and diverge from main piping service.The material of the stainless steel round bar is from Jiuli and Baosteel China, we control the quality from the very start. We polished three times to make sure the surface is perfect bright and smooth, and without any deficiency in quality. We have precision equipment to test according to the standard required and
PMItest to check the material before delivery.